EK-ACF ALU Fitting 10/16mm

EK-ACF ALU Fittings (Advanced Compression Fitting) are 10/16 soft-tube compression fittings designed for use with flexible soft tubing. With a high-quality finish, the EK-ACF Fittings are an aesthetically appealing and secure option for your cooling loop. The locking ring prevents the flexible tube from being pulled out of the fitting by compressing the tubing wall underneath the ring. EK-ACF ALU is a secure variant of the tubing fitting connector as the locking ring prevents flexible tube to be pulled out of the fitting. The locking ring compresses the tubing wall underneath the ring and it does not require any hose clamp or similar substitute. This makes it aesthetically more appealing than the ordinary barb fitting. This makes it aesthetically more appealing than the ordinary barb fitting. These fittings sport low-profile design hence it is recommended to handle the fitting barb using Allen Key 8mm.

EAN: ACF-ALU-10-16
$ 25.99

In stock!



* Required Fields

  • 2 years LimitedInternational Warranty
  • Fast & FreeTechnical Support
  • DHL & UPSFast Delivery
  • Payment by Paypalor Credit Card available
  • Paypal Buyerprotection
  • Made with carein EU

EK-ACF ALU Fitting 10/16mm

EK-ACF ALU Fittings (Advanced Compression Fitting) are 10/16 soft-tube compression fittings designed for use with flexible soft tubing. With a high-quality finish, the EK-ACF Fittings are an aesthetically appealing and secure option for your cooling loop. The locking ring prevents the flexible tube from being pulled out of the fitting by compressing the tubing wall underneath the ring. EK-ACF ALU is a secure variant of the tubing fitting connector as the locking ring prevents flexible tube to be pulled out of the fitting. The locking ring compresses the tubing wall underneath the ring and it does not require any hose clamp or similar substitute. This makes it aesthetically more appealing than the ordinary barb fitting. This makes it aesthetically more appealing than the ordinary barb fitting. These fittings sport low-profile design hence it is recommended to handle the fitting barb using Allen Key 8mm.

Technical data:
  • thread: G1/4" BSP; 4.5mm male thread length
  • supported tube: 3/8" - 5/8" ID/OD (roughly equals 10/16mm ID/OD)
  • outer diameter of a fitting: 22mm
  • installed height: 15.6mm
  • compatible tubing: PVC, EPDM, Norprene, silicone, most types of flexible tube
Read before you buy
  • Compatible only with EK Fluid Gaming series products!
  • Do not mix EK Fluid Gaming series fitting with brass, copper any other type of metal-based parts in your liquid cooling loop!
  • Do not use excessive force when attaching fitting barbs using Allen Key 8mm in order to prevent water block damage!
  • This fitting is to be used only with correctly sized tubing!
  • Do not use any tools to secure the locking ring to the fitting barb.

ARE YOUR PC TEMPS HIGH?

Join the ultimate water cooling club in the world.